Climbing the Air Memory range at Bensons, you reach the Air 9.0 last, and the obvious question is whether the top rung is the one worth having. It's a memory foam hybrid from Slumberland, the long-standing British name that now sits within Bensons for Beds and is sold only there: 60mm of zoned memory foam over two layers of pocket springs, under a cool-touch cover, standing 34cm tall. It's the tallest of the four Air beds on sale, with the most springs, built for anyone who wants the most mini springs in the range under a cover that doesn't feel warm the second you lie down. When I went to Bensons in October 2026 this was one of the beds I lay down on properly, side, back and front, and its cover was the nicest surprise of the visit.
I like this bed, and I'd still send most people two rungs down. Underneath, the 9.0 is very close to the Air 3.0: the same full-height pocket springs carry you on both, with only 10mm more memory foam and more mini springs on this one. I could feel that extra foam as a little more cushioning, and a little is all it was. Side sleepers belong on a different Air altogether.
On the shop floor it felt cool on top and too firm under a side sleeper's shoulder
The cool-touch cover lived up to its name: it felt cool to lie on. I'm usually unmoved by cooling fabrics, so that one goes in the bed's favour without any grumbling from me.
My side, which is how I sleep at home, was where it went wrong. Sleep on your side here and your shoulder goes into the memory foam for a moment before the springs stop it, and for me it stopped too soon. My shoulder was still pressed into the surface, which is how a too-firm bed feels to a side sleeper. My own guest bed is a Sealy memory foam hybrid, and it does much the same: the foam gives under a palm, then it's firm at the shoulder when I'm on my side.
On my back it was a much happier bed, and that was the position I rated highest. On your back, the memory foam settles into the hollow of your lower back and the full-height springs stop your hips dropping below your shoulders, which is the job firm memory foam does best. My front was comfortable too, and a firm bed with a modest layer of give is what most front sleepers are after.
Warm back sleepers of average or heavier build are who the Air 9.0 suits
Picture the person this bed is for: someone who sleeps on their back, is of average build or heavier, gets warm at night and wants firm support with a layer of memory foam to take the edge off. That person gets exactly what they're after. A heavier back sleeper does better still: more weight sinks you further into the 60mm of foam before the springs push back, and all the cushioning lives in that foam. Front sleepers who prefer firm are well served too.
As a side sleeper you should pass, and if you're slighter than average, pass without a second look, because a bed that pressed my shoulder will press yours harder. The grade won't rescue it. It comes in Medium, Firm and Extra Firm, at the same price in each size, and owners keep describing the Medium as firm. Plenty say the one delivered felt firmer than the display model they'd lain on. So order the Medium unless you're heavy and sleep on your back or front, in which case go to Firm, and treat the Extra Firm as a specialist grade for that group alone.
Over the Air 3.0, the extra money buys 10mm of foam and 700 mini springs
Every Air bed on sale stands on the same 1,250 full-height nested pocket springs, and the rungs differ in what goes on top. The Air Memory 2.0 puts 40mm of memory foam over them with no mini springs at all. The Air 3.0 adds 1,300 minis and takes the foam to 50mm. The Air 6.0 goes to 60mm with 1,500 minis and is the only one you can buy in Soft. The 9.0 keeps the 6.0's 60mm, takes the minis to 2,000 and adds another 2cm of height.
So the 3,250 springs are the 1,250 that hold you up plus 2,000 minis. Mini springs aren't what I'd pay up for, and I'd rather the money went on better foam. A top rung bought largely with minis and a few centimetres of height is, I'd say, where your money does least. Next to the Air 3.0, that isn't worth the extra spend. The cool-touch cover isn't a reason to pay up either, because the Air 3.0 has the same fabric.
Credit where it's due on the build. It's made in Bensons' own factory in Huntingdon, the quilting over the foam uses fillings that are 75% recycled polyester, the edge is reinforced, and it comes with a long guarantee. Nothing about it feels cheap. My quarrel is only with what the step up costs against what it adds.
Most of the reviews are for the Air 9.0 sold before May 2026
Bensons re-developed the 9.0 in May 2026, and most of the reviews are for the previous model. That one had a pillowtop surface, 1,050 full-height springs and stood 35.5cm tall, so read the older reviews for the general feel and not the details. On feel, owners of both versions say it's firm and firmer at home than in the showroom, and owners of the old one found the Medium firmer than its label. That fits what I found on my side.
Couples have something to like here: owners keep saying they no longer feel the other person turn over. Memory foam over pocket springs is the build that gives you that, because the foam takes the jolt before it reaches your side of the bed.
The edge splits opinion, and on any hybrid it's where my checking starts, because a soft edge turns a double into something narrower. Bensons reinforces it, and some owners say they can sit on the side quite happily. Others say it squashes when they perch there, and one owner of the current version wishes they could sit on the edge to put their slippers on. Sit on the corner in the shop for a minute, the way you would every morning, and judge it for yourself before you buy.
The complaints I take most seriously are a dip forming early and a smell that lingers after the airing, and owners of the current build mention both. They're the minority, but they're why I'd rotate it from the first month and keep the paperwork somewhere findable.
At 34cm, the Air 9.0 needs extra-deep sheets and two people to move it
34cm is about 13 and a half inches, which is deeper than a standard fitted sheet is cut for, so buy extra-deep sheets and a deep protector before it arrives. It lifts your bed too, and owners mention the height, one saying their feet don't touch the floor. While you're choosing, measure your base height and add 34cm to it.
There's only one sleeping side, so it never gets flipped, just spun round end to end. I'd rather have one that flips, because the wear then falls on two sleeping faces, but rotating is the bit of care that helps and almost nobody bothers with, so put it in the calendar. The flag-stitched handles are there for that job, and you'll want a second pair of hands, since owners find it heavy. If it turns out wrong for you, Bensons' 40 Night Comfort Guarantee exchanges it for another mattress, with a charge, so lie on it in your own position for a good ten minutes before you buy.
Two Slumberland Airs that suit more sleepers
Most buyers belong on the Slumberland Air 3.0 Memory Mattress. It has the same full-height springs and the same cool-touch cover, with 50mm of the same zoned memory foam, and it comes in Firm and Extra Firm, which is where a back sleeper who likes firm was heading anyway. Keep the difference. If you sleep on your side, go to the Air Memory 2.0 in Medium instead, the Air that gave my shoulder the room to sink that this one didn't.